How do you reset IPMI on Supermicro?

How do you reset IPMI on Supermicro?

IPMIView can be downloaded from the Supermicro website ( Log in to the IPMI WebUI. Click on “Restore”. Click on “OK”.

How do I reset my Supermicro BIOS password?

Typically a jumper will be found across pins #1 and #2 as the default position, and by shutting the computer down, unplugging the power cord and then moving the jumper so that it is across pins #2 and #3 will clear the Bios/CMOS settings. Here’s an example of a Supermicro PIIISEA motherboard.

Where is the IPMI Supermicro password?

Each new Supermicro motherboard comes with two stickers that contain the unique password assigned to that motherboard. One unique password sticker is placed near the BMC (Baseboard Management Controller) chip and/or close to the motherboard serial number label.

How do I reset my Supermicro Server?

Please go to IPMI web interface >> Configuration >> Port, check if IKVM server port is enabled. Next try to reboot BMC by going to IPMI web interface >> Maintenance >> Unit Reset. If it doesn’t work, please download IPMICFG and run the utility with option -fde to reset BMC back to factory default.

What is Supermicro IPMI default password?

Generally speaking, the default username and password for Supermicro IPMI is ADMIN / ADMIN. Since Supermicro platforms are plentiful, it is best practice to change the default, especially if you are going to colo the server.

How do I restart IPMI service?

How To Reboot The Dedicated Server With Intelligent Platform Management Interface (IPMI) Remotely?

  1. Login To IPMI.
  2. Go To Remote Control -> Power Control.
  3. Select ‘Reset Server’ Option and click ‘Perform Action’
  4. Your dedicated server will be rebooted in a few minutes.

How do I get into BIOS on Supermicro server?

When trying to enter the bios by remote console on our X9 boards with UEFI bios, you have to press “ESC” + “-” keys at the same time. When you have a X8 board you can use “F4” to enter the bios.

How do I reset my IPMI password?


  1. Connect to the host via SSH and from the menu select Shells, then boot shell.
  2. Issue the following command: ipmitool user list.
  3. Note the ID of the IPMI admin user.
  4. Change the password with the following command: ipmitool user set password.

What is a BMC password?

The default user ID is ADMIN and the default password is ADMIN . To change the BMC ADMIN expired password by using the web interface, enter https:// into a browser and then enter the access credentials of the BMC. The web interface prompts you to change the password.

What is the default password for Supermicro IPMI?

How do I change my IPMI password?

Changing the IPMI password

  1. Open a web browser on a computer that can reach the IPMI network and browse to the IPMI IP address for the node.
  2. Enter the username ADMIN and password ADMIN in the login prompt.
  3. Upon logging in, click the Configuration tab.
  4. Click Users.
  5. Select the ADMIN user and click Modify User.

Which is the latest version of Supermicro for IPMI password reset?

Supermicro has a package that includes DOS, Windows and Linux versions. The current revision is 1.02. Since we have physical access to this machine, we are using a DOS LiveCD to do the IPMI Password reset. The IPMICFG.EXE that one can see above is the tool that we will use.

What is the default username and password for IPMI?

The default IPMI username and password are ADMIN / ADMIN. WeSupport EMERGENCY SUPPORT GET SUPPORT NOW About Us Client Area Stats Call Us!1-800-383-5193

How to get IPMI IP address and MAC address?

The IPMICFG.EXE that one can see above is the tool that we will use. One of the first things that you should do is make sure you get the IPMI IP address and MAC address. Use ipmicfg -m to get this information.