What type of oil does a 2008 Chevy Cobalt take?
What type of oil does a 2008 Chevy Cobalt take?
Chevy Cobalt 2008, SAE 5W-30 Full Synthetic Motor Oil, 1 Quart by Idemitsu®.
What oil does a Chevy Cobalt LT take?
The oil used on a chevy cobalt is the following: stp 5w-30 high mileage engine oil 5 quart.
How much oil does a 2008 Chevy Cobalt LT take?
The oil capacity of the 2008 chevy cobalt is 4.87 Quarts.
What oil does a 07 Cobalt LT have?
SAE 5W-30 is preferred. Capacity: 5.1 quarts (with filter)After refill check oil level.
How do you reset the oil life on a 2008 Chevy Cobalt?
How to Reset Oil Life: Chevrolet Cobalt 2005-2010
- 1-Turn the ignition to run (second position)
- 2-Press the INFO button to scroll until the Oil Life displays.
- 3-Press the INFO and RESET (arrow) buttons at the same time to display OIL LIFE RESET.
- 4-Press and hold the ENTER (arrow) button until the cluster shows AKNOWLEDGED.
What type of oil does my 2009 Chevy Cobalt take?
The oil type used on a 2009 chevy cobalt is synthetic motor oil 5w-30.
How many gallons of oil does a Chevy Cobalt take?
Model: Chevrolet Cobalt (2005 – 2010) (USA)
| Engine | Capacity/Filter | |
|---|---|---|
| Cobalt 2.0 16V Supercharged (2006 – 2007) | LSJ | 5.7 l 6.02 US Quarts / Filter: n/a |
| Cobalt 2.0 16V Turbo (2008 – 2010) | LNF | 4.7 l 4.97 US Quarts / Filter: n/a |
| Advertisements | ||
| Cobalt 2.2 16V (2005 – 2005) | L61 | 4.7 l 4.97 US Quarts / Filter: n/a |
What kind of oil does a 2009 Cobalt use?
How do you reset the oil life on a Chevy Cobalt?
To reset the oil light on a chevy cobalt you will turn the ignition to run (second position). Press the info button to scroll until the oil life displays. Press the info and reset (arrow) buttons at the same time to display oil life reset. Press and hold the enter (arrow) button until the cluster shows aknowledged.
How do I reset my oil life?
Hold the Reset Button and Turn the Key Turn the ignition back to the ON position while holding the reset button. Watch the oil change or maintenance light carefully. It should start to blink. Allow the light to blink ON and OFF for a few seconds, then release the reset button and turn the ignition OFF.