Most popular 

What is voice controlled robot?

john

What is voice controlled robot?

Voice control robot is just a practical example of controlling motions of a simple robot by giving daily used voice commands. In this system, an android app is used as a medium for the transmission of human commands to microcontroller. A controller can be interfaced with the Bluetooth module through the UART protocol.

How do you make a robotic voice control?

How to Make Voice Controlled Robot

  1. Step 1: Gather the All Parts and Tools. 1 x Arduino Uno. 1 x HC-05 bluetooth module.
  2. Step 2: Connections of Parts. Connect 4 jumper wires to HC-05 bluetooth module. Plug in Tx pin of bluetooth module to Rx pin of arduino.
  3. Step 3: Programming the Code. arduino code given in below link –

How do you make a voice recognition module?

Voice Recognition ,Arduino

  1. Step 1: Components Required. FTDI convertor (200inr) , arduino uno(400 inr) , Geetech voice recognition module (1800inr)
  2. Step 2: Software Used ! Access port (win) or coolterm (Mac or win)! and arduino IDE.
  3. Step 3: Recording Voice Using Accesport.
  4. Step 4: Connecting It to Arduino.
  5. Step 5: Code.

How does a voice controlled robot work?

The RF transmitter of the Bluetooth can take human voice commands which are converted to encoded digital data for the advantage of an adequate range (up to 100 meters) from the robot. The receiver decodes the data before feeding it to microcontroller to drive DC motors via motor driver L298D for necessary work.

How does a voice controlled car work?

The car operates by having a voice receiver box on it where it receives your voice commands. The car has a 50 foot radius from where it is initially place on the ground. The child interacts with the car by shouting out commands like “faster”, “slower”, “right”, “left”, and “stop”.

How do I make voice activated?

To turn on Voice Access, follow these steps:

  1. Open your device’s Settings app .
  2. Tap Accessibility, then tap Voice Access.
  3. Tap Use Voice Access.
  4. Start Voice Access in one of these ways:
  5. Say a command, such as “Open Gmail.” Learn more Voice Access commands.

What are the different parts of robotic arm?

Parts of a Robotic Arm

  • Controllers. Controllers are the main processors of the robotic arms and act as their brains.
  • Arms. The arm is the main section of the robotic arm and consists of three parts: the shoulder, elbow and wrist.
  • End Effector. The end effector acts as the hand of the robotic arm.
  • Drives.
  • Sensors.

What are the basic robot elements?

The components of a robot are the body/frame, control system, manipulators, and drivetrain.

How does voice recognition module work?

Voice recognition is a technique that facilitates a natural and convenient human-machine interface using the voice recognition module. It extracts and analyses voice features of human delivered to a machine or computer through the mic.

How to make a voice controlled robot arm?

In this step you need a s3003 servo and his accessories, and the base that you cut. Identify the center of the movement base and do a hole of 3mm then put the s3003 arm like in the second photo. Then put other s3003 servo like in the four photo with some cable ties.

How to control a robot with Arduino voice?

First switch on the robot then download “AMR voice” from google play and open it, press the menu key and press where says “conect robot” after that conect to your robot, if you have to put a password put “1234” or”0000″, if it conect press the button and say “up” if the robot did a little movement to the side that you say, you are ready!

Where can I buy an Arduino robot arm?

An android cellphone with this program: AMR voice, you can find it at google play. I purchase all the materials on ebay but you also can purchase it in other store. You can use another servo if you like but think about the weight that it can support. An android cellphone with this program: AMR voice, you can find it at google play.