What does this code mean P0014?

What does this code mean P0014?

What Does Code P0014 Mean? The variable valve timing system increases fuel economy and engine performance by regulating when the intake and exhaust valves are opened and closed. When trouble code P0014 is set, it means that the exhaust camshaft in Bank 1 is more advanced than the ECM has told it to be.

Can low oil cause P0014?

Due to how it’s tied to oil pressure, the wrong oil level can also trigger the P0014 code. Checking your oil level is easy enough, but take precaution that low oil level hints at a potential leak. That said, it’d have to be a rather serious leak for low oil pressure problems to surface.

What does camshaft position B mean?

Finally, the “B” camshaft is the exhaust, right or rear camshaft, depending on the vehicle. Left/right and front/rear are from the perspective of the driver. So, P0014 refers to over-advanced timing of the camshaft in the bank containing cylinder 1 and that is in the exhaust, rear or right position.

How serious is P0014?

How serious is the P0014 code? The engine may run erratic and stall or have a hard starting problem. Fuel consumption may increase causing carbon to build up on the engine valves and pistons.

What causes a camshaft actuator to go bad?

The camshaft position sensor gathers information about the vehicle’s camshaft speed and sends it to the vehicle’s engine control module (ECM). Over time, the camshaft position sensor can fail, or become worn down, due to accidents or normal wear and tear.

How do you fix code P0014?

What repairs can fix the P0014 code?

  1. Resetting the fault codes and performing a road test.
  2. Replacing the oil and filter using the proper oil viscosity for the engine.
  3. Repairing or replacing the wiring to the camshaft oil control valve for bank 1 exhaust camshaft.

What does the p0014 code on a car mean?

Your car’s primary computer, which is often referred to as the powertrain control module (PCM), controls the solenoids. Code P0014 indicates that your car’s computer has detected a difference in the desired camshaft position angle and the actual camshaft position angle. As for the ‘B’ part of the code, it indicates the affected camshaft.

How does the p0014 camshaft position actuator work?

P0014 Description. The Camshaft Position (CMP) actuator is attached to each camshaft and is hydraulically operated in order to change the angle of the camshaft relative to Crankshaft Position (CKP). The CMP actuator solenoid is controlled by the control module.

Why does the Chevy Captiva p0014 throw the cam?

This is because the camshaft actuators use hydraulic energy to move. VVT uses camshaft actuators to adjust the position of the cam. When the camshaft timing will not return to a less aggressive profile after heavy engine load, P0014 will be thrown.

What causes a Chevy Equinox to have p0014?

Here are the most common causes of P0014 in the Chevy Equinox: Wiring Issues – If the wiring to the camshaft actuator has gone bad it can cause P0014. It’s good place to start diagnosing P0014.