Most popular 

How much material do I need for an infinity scarf?

john

How much material do I need for an infinity scarf?

To make an infinity scarf, you’ll need 3/4 yard (60” wide) of lightweight knit fabric. Fold the fabric in half the long way, pretty sides facing together inward. Pin the edges together. Stitch the long side together 1/2” from the edge by hand (remembering to backstitch) or use a sewing machine if you’ve got one.

How do you make an infinity scarves?

  1. Step 1 – Cut the Fabric For Infinity scarf. Cut each of the two fabric pieces at 12″ along the lengthwise grain.
  2. Step 2 – Sew along the long edges.
  3. Step 3 – Fold the Long piece In Half.
  4. Step 4 – How To Join The ends of the infinity scarf.
  5. Step 5 – Turn the Diy Infinity scarf And Finish.

How do you make an infinity scarf with 2 fabrics?

Double Sided Infinity Scarf

  1. Step 1: Prepare the Material and Trim the Fold.
  2. Step 2: Choose Your Second Fabric, Put Them Together, and Sew.
  3. Step 3: Trim the Short Sides and Turn Inside Out.
  4. At this point, you’ll want to line up one of the seams and start sewing the short sides together.
  5. Step 5: Top Stitch the Scarf Closed.

What is the best fabric to make an infinity scarf out of?

Pro Tip: Woven or knit fabrics work equally well for infinity scarves. If you’re going with woven, stick to lightweight to midweight linen, cotton and chambray. For knits, try double knits, ponte and jersey. Avoid heavy fabrics like twill, corduroy or canvas — they don’t have the drape you need in a scarf.

How long and wide should an infinity scarf be?

Measure your fabric in a rectangle shape to the length and width you want; we chose 60″ long x 40″ wide, as a 60″ infinity scarf can usually be wrapped twice around the neck for a nice, close fit. Because we’re making a double-layered scarf, the width needs to be cut twice as wide as the scarf’s final dimension.

How many stitches do I cast on for an infinity scarf?

Instructions: Using the long-tail cast on, cast on 100 stitches and join in the round, making sure not to twist stitches. Place a stitch marker to mark the beginning of the round. Repeat these two rounds until piece measures 7″ or desired width.