Lifehacks 

How do I configure Kerio VPN?

john

How do I configure Kerio VPN?

To configure Interface:

  1. In the administration interface, go to Interfaces.
  2. Double-click VPN Server.
  3. In the VPN Server Properties dialog, check Enable Kerio VPN Server.
  4. On tab Kerio VPN, select a valid certificate.
  5. The port 4090 is set as default. Both TCPTransmission Control Protocol – ensures packet transmission.

What is Kerio Control VPN client?

Kerio Control VPN. Client enables an encrypted connection from individual systems (clients) to a remote private network via the Internet. The connection enables these clients to access the private network as if they were physically connected.

How does Kerio Control Work?

Kerio Control enforces security through Intrusion Prevention, Traffic Rules, and Kerio AntivirusAn integrated antivirus engine powered by Bitdefender.. These features configure automatically, and ensure that the firewall permits only legitimate network communication.

Is Kerio VPN secure?

Secure your client-to-site connections with Kerio’s high-performance, configuration-free VPN client—or use an industry-standard IPsec VPN client, such as those pre-loaded on mobile devices.

How do I connect my Iphone to Kerio VPN?

iOS settings

  1. Open Settings.
  2. Scroll down and click General. Then scroll down and click VPN.
  3. Tap Add VPN configuration.
  4. Change Type to L2TP.
  5. Fill in all required information including Username/Password and Secret (Preshared Key).
  6. By default, VPN will not be connected automatically.

How do I set up Kerio Control?

To login in Kerio Control Statistics: Launch your web browser and type your Kerio Control address. The address has this pattern: https://server:4081/ where server refers to the name or IP addressAn identifier assigned to devices connected to a TCP/IP network. of Kerio Control, and 4081 represents a web interface port.

How do I install Kerio client?

Solution

  1. Open your browser and go to the Kerio Connect Webmail page.
  2. Click on the Integration with Windows link.
  3. Click on the Download button in the Kerio Connect Client section.
  4. Open the downloaded installer to run the installation.
  5. Wait for the installation to complete.
  6. Enter your Email and Password.

How do I access VPN Client Server?

Enter the address of your VPN provider in the Internet Address box. You can enter an address like vpn.example.com or a numerical IP address, depending on the server information your VPN provider gave you. You should also enter a Destination name—this can be anything you like.

Is Kerio Control free?

Download your free 30-day trial.

How do I install Kerio Control on Windows?

Windows

  1. Download the Kerio Connect installation file.
  2. Run the installer. Kerio Connect must be installed under the user with administration rights to the system.
  3. Follow the steps in the installation wizard.
  4. Click Finish to complete the installation.

How do I change my admin password in Kerio Control?

Changing your password

  1. In the Kerio Control Statistics interface, go to My Account.
  2. On the Account tab, type the old password once and the new password twice.
  3. Click Change password.

How do I connect to Kerio VPN on Android?

Preconditions

  1. open Configuration -> Interfaces -> double-click VPN server.
  2. Enable Use certificate for clients, Use preshared key and Enable MS-CHAP v2 authentication.
  3. Open Configuration -> Users.
  4. Click Add -> Fill out the necessary information.
  5. Open Rights tab -> enable ‘User can connect using VPN’ -> click OK.

How to use wins to Kerio Control VPN?

To use WINS to Kerio Control VPN Clients, select the WINS tab in the VPN Server Properties dialog box, and specify the WINS server. Kerio VPN Client must be installed on remote clients. For more information refer to Installing and configuring Kerio Control VPN Client for users.

Is there a shared password for Kerio Control?

For securing the communication, Kerio Control supports a Preshared key, so-called PSK or shared secret, and an SSL certification authentication. Note: The preshared key is a shared password for all users using an IPsec VPN. In the administration interface, go to Interfaces. Double-click on VPN Server.

Where to find static IP address for Kerio Control VPN?

Kerio Control VPN Clients connected to the firewall are monitored in the Status > VPN Clients section. For more information refer to Assigning static IP addresses for Kerio Control VPN Clients.