Why is the audio on my Insignia TV not working?

Why is the audio on my Insignia TV not working?

Another thing that you should try is to switch off and then on your sound. This also fixes the problem for many users. IF the problem persists then it might be an error in the configuration instead. Insignia suggests that their users reset their television back to its factory default settings if they get this error.

Why is my TV not giving out sound?

Check the audio settings on your TV and connected devices. Turn off and unplug your TV and connected devices. Inspect the TV cables and ports, then check the ones on your devices as well. Swap out the media device for another one, or change the TV’s speaker output to the internal speakers to see if it fixes the sound.

Why is my Insignia speakers not working?

Make sure the volume is not muted or the volume is set too low on your device. Try connecting your speakers to another audio device. If your speakers produce sound, the problem is with the audio device you are connected to. If your speakers do not produce sound, the problem is with your speakers.

Why is my TV stuck on max volume?

Unplug the TV from the power for at least a minute. Press all the TV side buttons a few times, pay attention for any irregular button presses. While it is unplugged, take the batteries out of the remote and press all the buttons twice. Leave the batteries out of the remote and set it aside.

How do you turn on Insignia TV without remote?

No Buttons at all For such TVs, you can simply find the power button under the Insignia Logo and press that button to turn it on. Be mindful that you can only use that button to power on the TV and Power off.

How do I fix the volume on my TV?


  1. Double Check Mute.
  2. Turn Up Volume.
  3. Reboot The TV.
  4. Check For Secondary Audio Protocol.
  5. TV Audio Input Settings.
  6. Switch The TV Channel.
  7. Check Headphone Port.
  8. Check Connection Cables.

How do you fix my speakers are not working?

How do I fix “no sound” on my computer?

  1. Check your volume settings.
  2. Restart or change your audio device.
  3. Install or update audio or speaker drivers.
  4. Disable audio enhancements.
  5. Update the BIOS.

How do I fix my Insignia TV with no signal?

To do an HDMI reset, unplug both the TV and all other connected devices. Then, disconnect all of the HDMI cables from both ends and reconnect them. Lastly, plug in all of the connected devices to the power. Give them about 30 seconds to boot up before plugging in the TV.