What materials do you need to make a mousetrap car?
What materials do you need to make a mousetrap car?
What You Need:
- Wooden snap-back mousetrap.
- Duct tape.
- 4 eye hooks.
- Wooden dowel that fits inside the eye hooks.
- Heavy cardboard.
- Large and small rubber bands.
- Foam board (usually found at a craft store)
- String.
What types of mouse trap cars can be made?
A mousetrap car is a model car made from simple materials that is powered by a mousetrap. A mousetrap car can be made from cardboard or balsa wood with CD’s for wheels and axles of wood or brass tubing. Power to drive the wheels is provided by a mousetrap to which a wand and string is attached to the snap arm.
What kind of string is best for a mousetrap car?
The string has to be strong enough to handle the pulling force but flexible and thin enough to wind tightly around the drive axle. We recommend using a Kevlar based fishing line because its high strength. You should stay away from nylon fishing line and dental floss, these do not work well with mousetrap racers.
What is needed to build a mouse trap car?
Materials Needed for a Mousetrap Car. There are several materials needed to build a basic mousetrap car. These items should be available at your local hardware store. You need a wooden mousetrap, two rubber bands, metal rods, eye screws, plywood, a drill, a small handsaw, a scale, a ruler, a vice or someone to hold the project steady, and wood glue.
What do levers have to do with mouse trap cars?
Mousetrap cars are powered by the spring of the mousetrap. When the mousetrap snaps back, the lever causes a release of energy . The lever is attached to a string that is wound around the back axle of the car. Therefore, when the lever snaps with the mousetrap, the string unwinds, which spins the axle and makes the car move .
What are the instructions for mouse trap?
Mouse Trap Instructions Release the arm bar from the staple. Move the arm bar to the back of the trap so it hangs over the back of the trap. Apply a small amount of high-protein bait, such as peanut butter, hazelnut spread or bacon to the yellow plastic pedal on the trap as shown.
How does a mousetrap car move?
The mousetrap powered car works by changing the kinetic energy (of a loaded mousetrap) into kinetic energy (when the trap springs). The jaw snapping shut pulls the string, which makes the axles turn, which spins the tires-propelling the car forward.