How do I update TP Link wireless adapter?

How do I update TP Link wireless adapter?

Right-click on My Computer on desktop and select Properties; Click Device Manager on the left side. Find and select the adapter, it might be in the Network Adapter or Other devices section. Right click it, and select Update Driver Software…

What is TP Link Wireless N PCI Express adapter?

Wireless N PCI Express 2.0(x1) Adapter TL-WN881ND allows you to connect a desktop computer to a wireless network and access high-speed Internet connection. Comply with IEEE 802.11n, they provide wireless speed up to 300Mbps, which is beneficial for the online gaming or even HD video streaming.

Why is my TP Link USB not working?

There are various causes of this kind of problem: too weak wireless signal, incorrect wireless settings on the router, or too much interference and problems of the wireless adapter. Try the following solutions: a. Check the wireless signal strength of your network.

How do I install a PCI WiFi adapter?

How to install a wireless networking card

  1. Step 1) Turn off your computer.
  2. Step 2) Open the case.
  3. Step 3) Identify an empty slot.
  4. Step 4) Remove the metal plate.
  5. Step 5) Align the wireless networking card with the PCI-E slot.
  6. Step 6) Push the card straight into the PCI-E slot.

How do I test my TP-Link wifi adapter?

Open the Device Manager and go to Network adapters, and then find the corresponding TP-Link adapter, right click it and then go to Properties. If you can see “This device is working properly.” in the red box, you have already installed the driver successfully.

What to do if TP-Link is not working?

Contact TP-Link support and tell us the wireless security type and model number of your router/access point. 1) Connect other wireless devices to the router and make sure the internet is working with other devices. 2) Check IP address, Default Gateway, and DNS of Wireless (Wi-Fi) Network Connection.

How do you check if TP-Link is working?

Go to Settings > Status to check the internet status of your extender. If everything is OK as shown below, your extender is successfully connected to your router. Connect your devices to the extender wirelessly or via an Ethernet cable.

How do I reinstall TP Link?

You may refer to How to log in to the web-based interface of Wi-Fi Routers (new logo), then go to Advanced-> System Tools -> Backup & Restore -> Factory Default Restore page, then click on the Factory Restore and wait the Router to reboot to its factory default settings.

How do I setup a TP Link to my computer?

Insert the adapter into a USB port on your computer directly. Click or (Network icon) on the task bar, select your Wi-Fi network, and click Connect. Note: In Windows XP, you need to close the TP-LINK Utility before using the Windows Wireless Utility. Select your Wi-Fi network from the utility window and click Connect.

What’s the speed of a TP-Link tl-wn881nd Wireless N Adapter?

It provides wireless speed up to 300Mbps, which is beneficial for the online gaming or even HD video streaming. TL-WN881ND has two detachable antennas that can be rotated and adjusted in different directions to fit various operation environment.

What can you do with 300Mbps Wireless N?

Wireless N speed up to 300Mbps makes it ideal for video streaming, online gaming and Internet calls* MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability

How to use a wireless N PCI Express adapter?

300Mbps Wireless N PCI Express Adapter 1 Wireless N speed up to 300Mbps makes it ideal for video streaming, online gaming and Internet calls* 2 MIMO technology with stronger signal penetration strength, wider wireless coverage, providing better performance and stability 3 Easily setup a highly secured wireless link with WPS™ (Wi-Fi Protected Setup)