How do I reset my HP LaserJet printer to factory settings?

How do I reset my HP LaserJet printer to factory settings?

To restore the product to the factory-default settings, follow these steps.

  1. Turn the product off. Disconnect the power cable from the product for 30 seconds and then reconnect.
  2. Turn the product on while you press and hold the Resume button for 10-20 seconds. The Attention light turns on.
  3. Release the Resume button.

How do I reset my HP Photosmart 5550 printer?

To Perform a Cold Reset via Control Panel:

  1. Turn the printer off…
  2. Turn the printer on.
  3. When you see the memory count begin, press and hold the āˆš key until all three LED lights remain lit.
  4. If a bootloader password has been set, a prompt to enter the password will be displayed in the control panel.

How do I reset my HP Color?

LED control panels:

  1. Open the HP Embedded Web Server (EWS): a. Open the HP Printer Assistant. ā— Windows 10: From the Start menu, click All Apps, click HP, and then select the printer name. ā—
  2. Click the System tab, and then click the Save and Restore page.
  3. Select Restore Defaults. The printer automatically restarts.

How do I reset my HP LaserJet cp1525nw to factory settings?

Restore factory-settings

  1. On the product control panel, press the OK button.
  2. Use the arrows buttons to select the Service menu, and then press the OK button.
  3. Use the arrows buttons to select the Restore defaults option, and then press the OK button. The product automatically restarts.

How do you reset the fuser kit on a HP 5550?

HP Color LaserJet 5550 Reset the fuser page count instructions

  1. Close the top cover, and turn the printer on. After a short while, the control panel should. display NEW FUSER KIT.
  2. Press Down Arrow button to highlight YES.
  3. Press Checkmark button to select YES.
  4. Press Up Arrow button to reset the fuser count.