How do I remove links from my fossil smart watch?

How do I remove links from my fossil smart watch?

Ensure the arrows shown on the links are pointing down. When removing links, hold one end of the pin pusher against the pin to be removed. Strike the other end of the pin pusher with the metal side of the watch hammer until the pin slides out. It will slide out in the direction of the arrow on the links.

How do you take links out of a watch band?

Method 1: By using a pin pusher

  1. Place the watch on the table with the push pins facing up.
  2. Insert the pin pusher into the hole and push the pin firmly.
  3. Once you’ve pushed the pin enough, it will pop out. Use pliers to remove it together with the link.
  4. Repeat the steps until you’ve removed the number of desired links.

How much does it cost to take links out of a watch?

How much does it cost to remove links from a watch? It will generally cost no more than $10 to remove links from a watch, although if you take it to the store you bought it from, they may do it free of charge.

How are the links on a Fossil watch?

On fossil watches, the links in them are connected by screwed or split pins. For screw pins, they have to be twisted out while split pins can easily be pushed through the links. You don’t need to look for the watch manufacturers to fix your loose wristwatch bands, you can have it fixed yourself.

How do you shorten the band on a Fossil watch?

Look on the inside of the watch band for two arrows appearing on the two links closest to the clasp. On the edge of those links you will see two holes where the pins are secured. Put the sharp end of the thumb tack into the pin hole. Tap the flat plastic end of the tack with the hammer in the direction the arrows are pointing.

How do you remove arrows from a watch band?

You will replace the pins – by pushing in – in the opposite direction of the arrows. With a watch link removal tool kit, position the watch band on its side in the watch band holder so that the arrows are on the top pointing downward; otherwise, hold, clamp or have another person hold the watch in the same manner.

How do you remove a link from a smartwatch?

Place the bracelet in the bracelet holder. Drive the punch tool into the link and use the metal end of the hammer to knock the pin out of the bracelet. Detach the links and drive the punch into the other part. Go over this same process with the other part.