Lifehacks 

Does DD-WRT support USB tethering?

john

Does DD-WRT support USB tethering?

USB Tethering with an Android phone, or using a USB Modem, on your DD-WRT-enabled router. Already tethered your phone to your computer via USB (or wifi) and now you want to move up to having a full router?

What is the DD WRT default password?

The default username is root and the default password is admin (from v23 SP1). Some earlier versions of DD-WRT did not require a username.

How do I reset my DD-WRT to factory settings?

The following procedure will clear out the NVRAM and set dd-wrt back to default values:

  1. With the unit powered on, press and hold the reset button on back of unit for 30 seconds.
  2. Without releasing the reset button, unplug the unit and hold reset for another 30 seconds.

How do I tether my iPhone to USB?

USB tethering

  1. From the Home screen, tap Settings > Personal Hotspot. If you don’t see Personal Hotspot, tap Carrier and you will see it.
  2. Tap the switch next to Personal Hotspot to turn on.
  3. Connect your device to the computer using the USB cable.
  4. The device will automatically begin tethering after syncing is complete.

How to forward port on Fritz Box WLAN 7141 router?

The basic process to open a port is: Setup a static IP address on either your computer or device that you want to forward a port to. Login to your FRITZ BOX WLAN 7141 router. Navigate to the port forwarding section. Click the Internet link. Click on Portfreigabe. Click the Neue Portfreigabe button. Select Andere Anwendungen in the drop down.

What do the USB ports on the FRITZ Box do?

USB Ports The FRITZ!Box has two USB ports, which can be used to inte- grate USB devices in your home network like USB printers or USB storage media. The connected USB devices can then be used simultaneously by all network devices in the home net- work of the FRITZ!Box.

Where do I find USB partition in DD-WRT?

In DD-WRT: Services, USB, Enable Core USB Support, Enable USB Storage support. Save/Apply and you should see your partition mounted by the router below. If you open up a shell (telnet/ssh), you should be able to do an ‘ls’ on /tmp/mnt/sda1 or where-ever it mounted your partition, and see the contents the same as you would with Windows Explorer.

What’s the password for the FRITZ Box router?

If all goes well you will see the following screen: You should see a box prompting you for your username and password. The Default FRITZ BOX WLAN 7141 Router Username is: admin. The Default FRITZ BOX WLAN 7141 Router Password is: admin.