Lifehacks 

How do I reset my Lexmark printer maintenance?

john

How do I reset my Lexmark printer maintenance?

Resetting the Roller Kit counter

  1. Turn off the printer.
  2. Enter the Configuration Menu. Press and hold the 2 and 6 buttons simultaneously.
  3. Select Reset Roller Kit Counter from the Configuration Menu.
  4. From the options displayed, select the roller kit to reset.
  5. Select Yes to reset the roller kit counter value.

How do I reset my maintenance kit on my counter?

Reset the maintenance-kit counter

  1. At the product control panel, press the Home button.
  2. Open the following menus: Administration. Manage Supplies. Reset Supplies. New Maintenance Kit.
  3. Select the Yes option to reset the maintenance-kit counter.

How do I reset my Lexmark ms610dn maintenance kit?

How To Reset Lexmark Maintenance Kit?

  1. Turn on your Lexmark printer after replacing the maintenance kit.
  2. Press and hold the Select + Return buttons for 8 seconds.
  3. Release the buttons when the reset maintenance control menu is displayed.
  4. If your printer displays the maintenance message, press the Select button.

How do you reset the maintenance light on a Lexmark cx510de?

Re: Lexmark cx510de Maintenance kit diag mode : hold key 3 and 6 and power on machine. keep holding for about 15 sec and then release. To reset the fuser count:1 Select Printer Setup from Diag Menu, and press Select. 2 Select Reset Fuser Cnt, and press Select.

What does it mean when the printer says maintenance kit low?

If the display panel on your HP LaserJet reads “Perform Printer Maintenance”, “Perform User Maintenance”, “Maintenance Kit Low”, “Maintenance Kit Very Low”, or anything along those lines it means your printer needs a preventative maintenance kit, which includes a fuser and various rollers.

What is the maintenance kit on a Lexmark?

The Maintenance Kit is composed of four parts; fuser, transfer roller, picks roller assembly and separator roller assembly. This document outlines the proper replacement procedure for each of the parts.

How do you reset the maintenance kit on a Lexmark cs410dn?

Resetting the maintenance counter

  1. From the home screen, touch Settings > Device > Maintenance > Configuration Menu > Supply Usage And Counters.
  2. Select Fuser Reset or ITM Reset.

How do I reset my Lexmark cs510de?

To restore the factory defaults on the printer:

  1. Press the Menu> button on the operator panel until Utilities Menu (or Tests Menu) appears on the display.
  2. Press the Select button once to enter the menu.
  3. Press the Menu> button until Factory Defaults appears on the display.
  4. Press the Select button.

How do you change the fuser on a Lexmark cs510de?

Solution

  1. Turn the printer off.
  2. Push the rear door release latch.
  3. Gently lower the rear door.
  4. Turn the two green fuser release levers, as shown.
  5. Grasp the used fuser by the handles and lift it straight up.
  6. Unpack the new fuser.
  7. Grasp the new fuser by the handles and align it with its opening.
  8. Gently lower it into place.

What is the maintenance kit on a printer?

A maintenance kit is a set of replacement parts for a printer. Each printer has a preset maintenance interval, which occurs after a certain amount of pages are printed. The maintenance interval lets the user know that it’s time to install the maintenance kit so that the parts within the printer do not get overused.

Where is the reset function on a Lexmark printer?

Note: The reset functions for the printer’s Fuser & ITU Life counters is found in the Diagnostics Menu. Fuser & ITU Life Counters (Reset functions in the Diagnostics Menu): Displays OK at all times. May cause the printer to stop when the life reaches twice the normal life. Represents the lower count of either the Fuser or ITU life.

What causes a Lexmark printer to stop printing?

May cause the printer to stop when the life reaches twice the normal life. Represents the lower count of either the Fuser or ITU life. Cannot independently be reset, but will it reset to OK when both the Fuser and ITU counters are reset.

How to reset photoconductor page count on a Lexmark?

Press the back button ( ) once. Press or on the operator panel until the check mark on the left is next to Exit Config Menu. Press once. Selecting this will cause the printer to reboot. If the counter has been reset correctly, the printer should return to a Ready prompt.

Can a Lexmark Fuser and ITU counter be reset?

Cannot independently be reset, but will it reset to OK when both the Fuser and ITU counters are reset. Should either the Fuser or ITU counter be reset, then the Maintenance counter will reflect the lower count of either the Fuser or the ITU’s remaining life.