Most popular 

How fast can a Derestricted 50CC scooter go?

john

How fast can a Derestricted 50CC scooter go?

50cc scooters generally do about 30-35mph restricted and 45-50mph derestricted.

How do you restrict a scooter?

How to Derestrict a 4-Stroke 50CC Scooter

  1. Detach the kickstart from the variator system.
  2. Open up the variator system.
  3. Disengage the front pulley wheel from the pulley system.
  4. Extricate the washer from its position around the front pulley rod.

Is there a governor on a scooter?

Unlike larger vehicles, scooters possess a relatively simple mechanical governor, which takes the form of a washer placed in the scooter’s variator system.

Is it possible to derestrict a 50cc Scooter by yourself?

Derestricting a 50cc scooter can be done by yourself without any help from a professional mechanic. If, however, you have the money, you may wish to employ a mechanic to do the derestriction job for you, but if you’re confident and want to save some cash, then simply follow these instructions to derestrict your 50cc scooter.

How does the variator work on a 50cc Scooter?

Most 50cc scooters are restricted by the placement of a spacing washer in the drivetrain system, also known as the variator system. Removing this washer allows the scooter’s variator system to operate at its full potential, increasing the scooter’s acceleration and top speed.

Is there a way to remove washers from a 50cc Scooter?

Derestricting your 50cc scooter is a simple process that you can easily do yourself with the help of three wrenches and the method that’s been laid out in this article. Usually, it’s only a matter of removing a couple of washers.

How to check if your scooter CDI is restricted?

Another way to check needs an RPM meter. Place your scooter on the main stand and make sure it’s secure. Ideally have someone to help you holding it in place. Rev the engine up slowly and check if at some point the engine stops revving for no reason. This is probably somewhere around 7-800rpm.

Useful tips 

How fast can a Derestricted 50cc scooter go?

john

How fast can a Derestricted 50cc scooter go?

50cc scooters generally do about 30-35mph restricted and 45-50mph derestricted.

How do you take the speed limiter off a scooter?

Remove all the plugs by pressing the pin slowly. Unscrew the speed limiter and remove the screws from it and open it up. After opening the speed limiter, you need to remove the metal piece that connects the wires to the scooter, limiting the scooter’s speed.

How do you take the rev limiter off a scooter?

Extract the limiting washer from the variator system. The limiting washer is positioned around the front pulley wheel, and in most scooters it can be removed by hand or with a pair of needle-nose pliers. Reconnect the left pulley wheel and replace the variator case faceplate.

How do you take the governor off a scooter?

How to Remove a Scooter Governor

  1. Remove the kick stand.
  2. Unscrew and remove the two bolts holding the plastic cover of the intake box if your scooter has one.
  3. Unscrew and remove the bolts of the variator case lid.
  4. Crack the bolt holding the faceplate of the front pulley wheel with a socket wrench or an impact wrench.

Can you Derestrict an electric scooter?

Before you derestrict your electric scooter, you should know that this modification will void the warranty. Derestricting your scooter is a two-part process. The first part involves disabling the capacitor discharge ignition (CDI) unit. The CDI unit electronically restricts the engine from reaching full power.

Where is the governor at on a scooter?

Your scooter’s rev limiter prevents its engine from transferring all of its energy to the drive belt. It is located in your scooter’s drive belt or variator system on the left side of the scooter.

How do you take the limiter off a moped?

How do you take the restrictor off of an electric scooter?

On Uscooters and E-Twow Booster versions the speed limit can be completely removed by following these steps:

  1. Turn on the display.
  2. Press and hold the electronic brake (the one from the handle).
  3. Press the POWER button.
  4. Move to P3 (sport option) using the LIGHT button.
  5. Press the S (SET) button.

Is it possible to derestrict a 50cc Scooter by yourself?

Derestricting a 50cc scooter can be done by yourself without any help from a professional mechanic. If, however, you have the money, you may wish to employ a mechanic to do the derestriction job for you, but if you’re confident and want to save some cash, then simply follow these instructions to derestrict your 50cc scooter.

Where is the variator on a 50cc Scooter?

Locate the variator system on your 50cc scooter. You should see a plastic intake covering over it. You want to take this off. In some cases, this cover will be bolted to the carburetor. With a socket wrench, you can easily remove the bolts, so that you can then remove the covering.

How can I get rid of the exhaust restriction on my scooter?

The exhaust restriction is applied to most scooters and can be easily removed. All that is needed is a little grinder (ideally Dremel, Proxxon, or other micro grinders). Most stock exhaust feature a dummy pipe on the exhaust manifold whereas restricted after market exhausts have a little diameter restriction welded into the down pipe.

Is there a way to remove washers from a 50cc Scooter?

Derestricting your 50cc scooter is a simple process that you can easily do yourself with the help of three wrenches and the method that’s been laid out in this article. Usually, it’s only a matter of removing a couple of washers.