Is the RE20 a good mic?

Is the RE20 a good mic?

The RE20 is a High Quality Mic. This mic is fantastic for voice over in the home studio environment. It rejects a lot of sound coming from behind the mic. Minimal acoustic treatment allows you to get a very low noise floor.

Is the RE20 a condenser microphone?

Electro-Voice RE20 Dynamic Microphone Features: Voice tailored frequency response brings out rich fundamental and chest voice. Large diaphragm delivers condenser-like sensitivity and response. Humbucking coil further reduces noise from poor grounding. Bass rolloff switch makes it easy to rein in low frequencies.

Does RE20 need a shock mount?

The Quintessential Broadcast Combo Of course, no broadcast professional would dream of using an RE20 without two essential accessories: the 309A shockmount and WS-PL2 windscreen.

Is Cloudlifter necessary for SM7B?

Does Shure SM7B really needs Cloudlifter? Well, the answer is that the legendary vocal microphone Shure SM7B works perfectly without Cloudlifter mic activator however if you need the crystal-clear sound with ultra clean gain, it is essential to have Cloudlifter so that your sound quality will improve drastically.

Do you need cloud lifter with RE20?

Technical Editor Hugh Robjohns replies: It is quite normal to need to run the mic preamp at maximum gain when using an RE20 for speech. In this scenario, an in-line gain booster such as the Cloud Mics Cloudlifter, Triton Audio FetHead or the MartiAudio In-line Preamp Booster should help.

Do condenser mics need Cloudlifter?

Cloudlifters do NOT work with condenser mics. In cases other than extremely long cable runs, you wouldn’t even want that: condenser mics are plenty loud; adding that much boost to their signal would probably overdrive the input you’ re connecting with.

Are mic shock mounts Universal?

Are shock mounts universal? Usually the shock mounts are designed to work best with a particular model or series. That is why it is recommended to get the microphone shock mount that was designed for your studio microphone.

Is a Cloudlifter worth it?

The CL-1 Cloudlifter is perfect for someone who only needs one microphone, or as a stopgap for a more comprehensive preamp or interface. However, you may not even want to upgrade if you aren’t trying to coordinate an entire multi-speaker podcast—this unit works really well on its own.

How much gain does an SM7B need?

When selecting a preamp for the SM7 for voice-over work, make certain the preamp has a minimum 60 dB of gain. Here’s why: With an acoustic input of 84dBSPL – typical speech level at 3 inches, the output level of the SM7 is -69dBV. The mic preamp must increase the mic signal level up to about 0dBV – line level.

What do you need to know about Electro Voice RE20?

The Electro-Voice RE20 is a high-end vocal microphone. So, how does it work, how does it sound, how much does it cost, and who is it best suited to? That’s the purpose of this review, so let’s dive in and find out… What is the Electro-Voice RE20? The RE20 is a premium dynamic microphone, optimised to record voice.

Is the Shure EV RE20 a dynamic mic?

The other large diaphragm dynamic was the Shure SM7B, which I reviewed last week). Like the SM7, the EV RE20 is an end-address (you talk into the end and not the side, as with most large diaphragm condensers) dynamic mic found most often in use by radio DJs and other broadcasters.

What kind of work can you do with EV RE20?

This is an incredible mic for anyone doing voice-over work, podcasts, or any kind of broadcasting. It’s famous for broadcast use, found in radio stations around the world. Its sound quality is amazing and its resistance to recording p-pops is a huge time saver if you are recording vocals.

Are there any downsides to the RE20 mic?

The downsides of the RE-20 are the bulkiness and a fairly high price. RE20 is an industry standard for a reason and that reason being the sound quality. Of course, it may not be the most expressive mic out there, nor the most transparent or crispy as condenser mics are.